ACU (Audio Communication Unit)
Audio interface cards available for UCP1600/2120/4131 series chassis; the ACU module provides 2 pairs of audio ports.
← All products
Products
Unified Communications Platform
Modular unified communications platforms (UCP, UScale) combining a VoIP gateway and IPPBX in one scalable enclosure.
AIU-16 (Analog Interface Unit-16)
FXO/FXS analog interface cards for UCP1600/2120/4131 series chassis; the AIU-16 module provides 16 FXS ports.
AIU-8 (Analog Interface Unit-8)
FXO/FXS analog interface cards for UCP1600/2120/4131 series chassis; the AIU-8 module provides 4 FXO ports and 4 FXS ports, 8 FXS ports or 8 FXO ports.
CCU-N-ALDER
CPU: 3,40 G Intel quad core processors N100; RAM: 8 GB DDR5; NIC: 3 Gigabit Ethernet (two on the front panel and one on the rear panel);
CCU-N-BAYL
CCU-N-BAYL is a main control board developed for VoIP applications, supporting Asterisk, Issabel, Elastix, FreePBX, VitalPBX, BrikerPBX, Yate™ and IPPBX/IVR, as well as other open-source software and PBX, firewall, IVR, and voice gateway applications.
CCU-N-GML
CCU-N-GML is a new version of the X86 motherboard for communication systems, equipped with an Intel quad-core processor. The CCU-N-GML can handle up to 450 simultaneous calls using the G.711 codec or 200 simultaneous calls using the G.729 codec. To provide users with clear, high-fidelity audio and video calls, the CCU-N-GML integrates a wide range of HD voice and video codecs. The CCU-N-GML supports comprehensive protocol processing, supporting SIP, IAX2 and other IP-side protocols, as well as BRI, PRI, SS7, R2, GSM, WCDMA and other CPE-side protocols. The CCU-N-GML supports 3CX, Asterisk, Issabel, FreePBX, VitalPBX and IPPBX/IVR, as well as other open-source software applications, and PBX, firewall, IVR and voice gateway applications.
DTU-30X (Digital Trunk Unit)
Supports 1/2/4 software-selectable T1/E1/PRI interfaces; supports up to 30/60/120 concurrent calls.
MIU (Magnet Interface Unit)
Magnetic interface cards are available for UCP1600/2120/4131 Series chassis; the MIU module provides 4/8 magnetic ports.
RIU (Radio Interface Unit)
Magnetic interface cards available for UCP1600/2120/4131 series chassis; the RIU module provides 2/4 radio trunk ports.
RJ21 Wiring (Using With AIU-16 and MAG1000)
RJ21 wiring is used with the OpenVox AIU-16 module to connect VoIP and PSTN.
RSU (RAID Storage Unit)
Built around the ASM1062R controller; provides a PCIe 2.0 x1 interface and two SATA 6 Gbps ports.
UScale IAD S1224 Integrated Access Device
Integrated Access Device (IAD); Supports 32-224 analog user channels; Seamless migration from traditional analog telephones to modern IP voice networks, ensuring carrier-grade business continuity;
UScale IAD S132 Integrated Access Device
IAD integrated access device; supports 8-32 analog user channels; seamless migration from traditional analog phones to modern IP voice networks, ensuring carrier-grade business continuity;
UScale IAD S196 Integrated Access Device
Integrated Access Device (IAD); supports 32-96 analog user channels; seamless migration from traditional analog telephones to modern IP voice networks, ensuring carrier-grade business continuity;
UScale X1911 Unified Gateway(IPPBX)
Supports up to 300 users; Main voice switching equipment; Integrated broadband and narrowband design, high integration;
UScale X1960 Unified Gateway（IPPBX)
Supports up to 1000 users; core voice switching equipment; integrated broadband and narrowband design, high integration;
UScale X1981 Unified Gateway (IPPBX)
Supports up to 20 000 users; Main voice switching equipment; Integrated wideband and narrowband design, high integration;
WTU-GSM (Wireless Trunk Unit-GSM)
GSM interface cards for UCP1600/2120/4131 series chassis; the WTU-GSM module provides 4 GSM ports.
WTU-LTE (Wireless Trunk Unit-LTE)
LTE interface cards for UCP1600/2120/4131 series chassis; the WTU-LTE module provides 4 LTE ports.
Not sure which model fits?
Tell us about your project and we will recommend the right OpenVox models.